api 5l psl2 welded pipe

S. Piping Solutions is stockiest, suppliers & exporters of API 5L Line Pipe, API 5L PSL1 Seamless Pipe, API 5L PSL2 Seamless Pipe, API 5L PSL1 Welded Pipe, API 5L PSL2 Welded Pipe, API ERW Pipe, API HFW Pipe, API SAW Pipe, API LSAW Pipe, API HSAW Pipe, API DSAW Pipe, API 5L Sour Service Pipe, API 5L Offshore Service Pipe.

S. Piping Solutions is a family corporation grounded in hard work, integrity and trust, values integral to all we do. Throughout more than 40 years experience in the international markets, Ashtapad has successfully entered into Mid-east, Australia, America, Africa and Europe markets, providing piping system materials and serving for CNPC, ARAMCO, KOC, CCC, NIOC, CHEVRON, LINDE, PEMEX, FLUOR, NNPC, SONATRACH, TECHNIP, PETROFAC, PETRONAS, PDVSA, SHELL, BP, etc. Reliable can supply API 5L PSL1 & PSL2 Pipe/ ERW/ SAWH/ SAWL/ Coil Tube Linepipe with 3LPE/3LPP/2FBE Coating.

The environment management system of the company is certified according to the requirements of ISO 9001:2008, 14001, 18001, ISO 18001:2007, PED 97/23/EC & Govermment Recognized Export House. Few of the major brands we represent are Arcelor Mittal, Sumitomo, Tenaris, Benteler, Jazeera Steel, Hyundai HYSCO, Arabian Pipes Company, Sandvik, Froch, etc. Our materials are approved by Saudi ARAMCO, SABIC, SHELL, ADNOC, GASCO, PDO, KNPC, KOC, QATAR Gas, OXY, IOOC, SGC etc. It is recognized by major inspection agencies like TUV, DNV, Velosi, Lloyds, Gl, Intertek Moody, BV , SGS, EIL, Jacob H & G, Bax Council, Mecon, PDIL, UDHE, Toyo, ABS, BARC etc.

We are exporting to more than 40 countries like UAE, EGYPT, TURKEY, Singapore, Malaysia, Iran, Iraq, Saudi Arabia, Bahrain, Qatar, Yemen, Kuwait, Argentina, Palestin, Algeria, Italy, Tunisia, Oman, Mauritania, USA, Bangladesh, Lebanon, Canada, Vietnam, Sudan, Syria, Morocco, Libya, Jordon, Indonesia, The Netherland, Brazil, Polland, Korea, USA, UK, Croatia, China, France, Ecuador, South Korea, South America, and many more..

S> Piping Solutions can supply superior Quality High strength, High Toughness, Homogeneous material and Corrosion Resistant Line Pipes for various special services such as offshore and sour services.

Grades covered by this specification are A25 ,A ,B (and the following "X" Grades), X42, X46, X52, X56, X60, X65, X70, X80.  The two digit number following the "X" indicates the Minimum Yield Strength (in 000's psi) of pipe produced to this grade.

 

Chemical composition for PSL 2 pipe with t ≤ 25,0 mm (0.984 in)

Steel grade (steel name) Mass fraction, based upon heat and product analyses
% maximum
Carbon equivalenta
% maximum
C b Si Mn b P S V Nb Ti Other CEiiw CEpcm
Welded pipes
L245R or BR 0,24 0,40 1,20 0,025 0,015 c c 0,04 e 0,43 0,25
L290R or X42R 0,24 0,40 1,20 0,025 0,015 0,06 0,05 0,04 e 0,43 0,25
L245N or BN 0,24 0,40 1,20 0,025 0,015 c c 0,04 e 0,43 0,25
L290N or X42N 0,24 0,40 1,20 0,025 0,015 0,06 0,05 0,04 e 0,43 0,25
L320N or X46N 0,24 0,40 1,40 0,025 0,015 0,07 0,05 0,04 d,e 0,43 0,25
L360N or X52N 0,24 0,45 1,40 0,025 0,015 0,10 0,05 0,04 d,e 0,43 0,25
L390N or X56N 0,24 0,45 1,40 0,025 0,015 0,10f 0,05 0,04 d,e 0,43 0,25
L415N or X60N 0,24f 0,45f 1,40f 0,025 0,015 0,10f 0,05 0,04f g,h as agreed
L245Q or BQ 0,18 0,45 1,40 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L290Q or X42Q 0,18 0,45 1,40 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L320Q or X46Q 0,18 0,45 1,40 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L360Q or X52Q 0,18 0,45 1,50 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L390Q or X56Q 0,18 0,45 1,50 0,025 0,015 0,07 0,05 0,04 d,e 0,43 0,25
L415Q or X60Q 0,18f 0,45f 1,70f 0,025 0,015 g g g h 0,43 0,25
L450Q or X65Q 0,18f 0,45f 1,70f 0,025 0,015 g g g h 0,43 0,25
L485Q or X70Q 0,18f 0,45f 1,80f 0,025 0,015 g g g h 0,43 0,25
L555Q or X80Q 0,18f 0,45f 1,90f 0,025 0,015 g g g i,j as agreed
 
L245M or BM 0,22 0,45 1,20 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L290M or X42M 0,22 0,45 1,30 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L320M or X46M 0,22 0,45 1,30 0,025 0,015 0,05 0,05 0,04 e 0,43 0,25
L360M or X52M 0,22 0,45 1,40 0,025 0,015 d d d e 0,43 0,25
L390M or X56M 0,22 0,45 1,40 0,025 0,015 d d d e 0,43 0,25
L415M or X60M 0,12f 0,45f 1,60f 0,025 0,015 g g g h 0,43 0,25
L450M or X65M 0,12f 0,45f 1,60f 0,025 0,015 g g g h 0,43 0,25
L485M or X70M 0,12f 0,45f 1,70f 0,025 0,015 g g g h 0,43 0,25
L555M or X80M 0,12f 0,45f 1,85f 0,025 0,015 g g g i 0,43f 0,25
L625M or X90M 0,10 0,55f 2,10f 0,020 0,010 g g g i --- 0,25
L690M or X100M 0,10 0,55f 2,10f 0,020 0,010 g g g i,j 0,25
L830M or X120M 0,10 0,55f 2,10f 0,020 0,010 g g g i,j 0,25

 

Table ---Chemical  composition for PSL 2 pipe with t ≤ 25,0 mm (0.984 in) (Continued) 

a    Based upon product analysis. For seamless pipe with t > 20,0 mm (0.787 in), the carbon equivalent limits shall be as agreed. The CEiiw limits apply if the carbon mass fraction is greater than 0,12 % and the CEpcm limits apply if the carbon mass fraction is less than or equal  to 0,12 %.

b    For each reduction of 0,01 %  below the specified maximum for carbon, an increase of 0,05 % above the specified maximum for manganese is permissible, up to a maximum of  1,65 % for grades ≥ L245 or B, but ≤ L360 or X52; up to a maximum of 1,75 % for grades >L360 or  X52, but < L485  or X70; up to a maximum of 2,00 % for grades ≥L485 or X70, but ≤ L555 or X80; and up to a maximum of 2,20 % for grades >L555 or X80.

c    Unless otherwise agreed , the sum of the niobium and vanadium concentrations shall be ≤ 0,06 %.

d    The sum of the niobium, vanadium and titanium concentrations shall be ≤ 0,15 %.

e    Unless otherwise agreed, 0,50 % maximum for copper, 0,30 % maximum for nickel, 0,30 % maximum for chromium and 0,15 % maximum for molybdenum.

   Unless otherwise agreed.

g   Unless otherwise agreed, the sum of the niobium, vanadium and titanium concentrations shall be ≤ 0,15 %.

h   Unless otherwise agreed, 0,50 % maximum for copper, 0,50 % maximum for Nickel, 0,50 % maximum for chromium and 0,50 % maximum for molybdenum.

i    Unless otherwise agreed,  0,50 % maximum for copper, 1,00 % maximum for nickel,  0,50 % maximum for chromium and 0,50 % maximum for molybdenum.

j    0,004 % maximum for boron.

Chemical compostion

9.2.4    For PSL 2 pipe with a product analysis carbon mass fraction equal to or less than 0,12 %, the carbon equivalent, CEpcm, shall be determined using Equation (2):            


where the symbols for the chemical elements represent the mass fraction in percent (see Table 5).

.If the heat analysis for boron is less than 0,000 5 % then it is not necessary for the product analysis to include boron, and the boron content may be considered to be zero for the CEpcm calculation.

9.2.5     For PSL 2 pipe with a product analysis carbon mass fraction greater than 0,12 % the carbon  equivalent, CEllw shall be determined using Equation (3):           

                                


where the symbols for the chemical elements represent the mass fraction in percent (see Table  5).

NOTE: A derogation from the ISO rules for the presentation of chemical equations has been granted for Equations (2) and (3) in deference to their longstanding use in the industry.

 

API 5L PSL 2 Pipe Mechanical Properties Table

Pipe grade Pipe body of seamless pipes Weld seam of HFW, SAW and COW pipes
Yield strength 
Rto,5b
MPa (psi)
Tensile strength 
Rm
MPa (psi)
Ratioa,b,c
Rto,5/Rm
Elongation
Af
%
Tensile strength 
Rm
MPa (psi)
minimum maximum minimum maximum maximum minimum minimum
L245R or BR
L245N or BN
L245Q or BQ
L245M or BM
245 
(35 500)
450 e
(65 300) e
415
(60 200)
760
(110 200)
0,93 f 415
(60 200)
L290R or X42R
L290N or X42N
L290Q or X42Q
L290M or X42M
290
(42 100)
495
(71 800)
415
(60 200)
760
(110 200)
0,93 f 415
(60 200)
L320N or X46N
L320Q or X46Q 
L320M or X46M
320
(46 400)
525
(76 100)
435
(63 100)
760
(110 200)
0,93 f 435
(63 100)
L360N or X52N
L360Q or X52Q 
L360M or X52M
360
(52 200)
530
(76 900)
460
(66 700)
760
(110 200)
0,93 f 460
(66 700)
L390N or X56N 
L390Q or X56Q 
L390M or X56M
390
(56 600)
545
(79 000)
490
(71 100)
760
(110 200)
0,93 f 490
(71 100)
L415N or X60N 
L415Q or X60Q 
L415M or X60M
415
(60 200)
565
(81 900)
520
(75 400)
760
(110 200)
0,93 f 520
(75 400)
L450Q or X65Q 
L450M or X65M
450
(65 300)
600
(87 000)
535
(77 600)
760
(110 200)
0,93 f 535
(77 600)
L485Q or X70Q 
L485M or X70M
485
(70 300)
635
(92 100)
570
(82 700)
760
(110 200)
0,93 f 570
(82 700)
L555Q or X80Q 
L555M or X80M
555
(80 500)
705
(102 300)
625
(90 600)
825
(119 700)
0,93 f 625
(90 600)
L625M or X90M 625
(90 600)
775
(112 400)
695
(100 800)
915
(132 700)
0,95 f 695
(100 800)
L690M or X100M 690
(100 100)
840
(121 800)
760
(110 200)
990
(143 600)
0,97 g f 760
(110 200)
L830M or X120M 830
(120 400)
1 050
(152 300)
915
(132 700)
1 145
(166 100)
0,99 g f 915
(132 700)

a    For intermediate grades, the difference between the specified maximum yield strength and the specified minimum yield strength shall be as given in the table for the next higher grade, and the difference between the specified minimum tensile strength and the specified minimum yield strength shall be as given in the table for the next higher grade, For intermediate grades lower than Grade L555 or X80, the tensile strength shall be ≤ 760 MPa (110  200 psl). For intermediate grades higher than Grade L555 or X80, the maximum permissible tensile strength shall be obtained by interpolation. For SI units, the calculated value shall be rounded to the nearest 5 MPa. For USC units, the calculated value shall be rounded to the nearest 100 psi.

b   For grades >L625 or X90, Rp0,2 applies.

c   This limit applies for pipe with D >323, 9 mm (12.750 in).

d   For intermediate grades, the specified minimum tensile strength for the weld seam shall be the same value as was determined for the pipe body using footnote a).

e   For pipe with D<219,1 mm (8.625 in), the maximum yield strength shall be ≤495 MPa (71 800 psi).

f    The specified minimum elongation, Af,   shall be as determined using the following equation:    



Where

C        is   1 940 for calculations using SI units and 625 000 for calculations using USC units;

A xc    is the applicable tensile test piece cross-sectional area, expressed in square millimeters (square inches), as follows:

---- for circular cross-section test pieces, 130 mm2 (0.20 in2)  for 12,5 mm (0.500 in) and 8,9 mm (0.350 in) diameter test pieces;  and 65 mm2 ( 0.10 in2)   for 6,4 mm (0.250 in) diameter  test pieces;

---- for full-section test pieces, the lesser of a) 485 mm2 (0.75 in2) and b) the cross-sectional area of the test piece, derived using the specified outside diameter and the specified wall thickness of the pipe, rounded to the nearest 10 mm2 (0.01 in2)

---- for strip test pieces, the lesser of a) 485 mm2(  0.75 in2 )  and b) the cross-sectional area of the test piece, derived using the specified width of the test piece and the specified wall thickness of the  pipe, rounded to the nearest_10 mm2 (0.01 in2 );

Tolerances for diameter and out-of-roundness 


Specified
outside diameter

D
mm (in) 

Diameter tolerances
mm (in)

Out-of-roundness tolerances
mm (in)

 

Pipe except the end a

Pipe end a, b, c

Pipe except the end a

Pipe end a, b, c

SMLS pipe

Welded pipe

SMLS pipe

Welded pipe

< 60,3 (2.375)

- 0,8 (0.031) to + 0,4 (0.016)

 

d

≥ 60,3 (2.375)
to
≤ 168,3 (6.625)


± 0,007 5 D

- 0,4 (o.o16) to + 1,6 (0.063)

0,020 D

0,015 D

>168,3 (6.625) 
to
≤ 610 (24.000)

± 0,007 5 D

± 0,007 5 D
but.maximum
of + 3,2 (0.125)

± 0,005 D,
but maximum of ± 1,6 (0.063)

> 610 (24.000)
to
≤ 1 422 (56.000)

± 0,01 D

± 0,005 D,
but.maximum
of + 4,0 (0.160)

± 2,0 (0.079)

±1,6 (0.063)

0,015 D
but maximum of 15 (0.6),
for d / t ≤ 75

0,01 D,
but maximum of 13 (0.5).
for d / t ≤ 75

by agreement 
for d / t > 75

by agreement 
for d / t > 75

> 1 422 (56 000)

as agreed

a   The pipe end includes a length of 100 mm (4.0 in) at each of the pipe extremities.
b   For SMLS pipe, the tolerances apply for t ≤ 25.0 mm (0.984 in). and the tolerances for thicker pipe shall be as agreed.

c   For pipe with D ≥ 219,1 mm (8.625 in), the diameter tolerance and the out-of-roundness tolerance may be determined using the calculated inside      diameter (the specified outside diameter minus two times the specified wall thickness) or measured inside diameter rather than the specified      outside diameter.(see 10.2.8.3.)

d    lncluded in the diameter tolerance.


Tolerances for wall thickness 


Wall thickness
t
mm (in)

Tolerances a
mm (in)

SMLS pipe b

≤ 4,0 ( 0.157)

+ 0,6 (0.024)
- 0,5 (0.020)

> 4,0 ( 0.157) to <25,0 (0.984)

+ 0,150
- 0,125

≥ 25,0 (0.984)

+3,7 (0.146) or + 0,1 t, whichever is the greater
- 3,0 (0.120) or - 0,1 t, whichever is the greater

Welded pipe c, d

≤ 5,0 (0.197)

± 0,5 (0.020)

> 5,0 (0.197) to <15,0 (0.591)

± 0,1 t

≥ 15,0 (0.591)

±1,5 (0.060)

 
 
 
 
 
 

a   if the purchase order specifief a minus tolerance for wall thickness smaller than the applicable value given in this table, the plus tolerance for wall thickness shall be increased by an amount sufficient to maintain the applicable tolerance range.

b   for pipe with D ≥ 355,6 mm (14.000 in) and t ≥ 25,0 mm (0.984 in) the wall-thickness tolerance locally may exceed the plus tolerance for wall thickness by an additional 0,05 t, provided that the plus tolerance for mass (see 9.14) is not exceeded.

c   The plus tolerance for wall thickness does not apply to the weld area.

d   See 9.13.2 for additional restrictions.

Inspection Frequency for PSL1 Pipe

Type of Inspection

ype of pipe

requency of inspection

Heat analysis All pipe One analysis per heat of steel
Product analysis SMLS, CW, LFW, HFW, LW, SAWL, SAWH, COWL or COWH Two analyses per heat of steel (takenfrom separate product items)
Tensile testing of the pipe body of welded pipe with D ≤ 48.3 mm(1.900 in), in Grade L175 or A25 CW, LFW or HFW Once per test unite of not more than 25 tonnes (28 tons) of pipe
Tensile testing of the pipe body of welded pipe with D ≤ 48.3 mm(1.900 in), in Grade L175P or A25P CW  
Tensile testing of the pipe body of welded pipe with D > 48.3 mm (1.900 in), in Grade L175 or A25 CW, LFW or HFW Once per test unit of not more than 50 tonnes (55 tons) of pipe
Tensile testing of the pipe body of welded pipe with D > 48.3 mm (1.900 in), in Grade L175P or A25P CW  
Tensile testing of the pipe body of seamless pipe SMLS Once per test unit of pipe with the same cold-expansion ratio a
Tensile testing of the pipe body of welded pipe in grades higher than Grade L175 or A25 LFW, HFW, LW, SAWL, SAWHCOWL, or COWH  
Tensile testing of the longitudinal or helical seam weld of weldedpipe with D ≥ 219.1 mm (8.625 in) LFW, HFW, LW, SAWL, SAWHCOWL or COWH Once per test unit of pipe with the samecold-expansion ratio a, b, c
Tensile testing of the strip/plate end weld of welded pipe with D ≥219.1 mm (8.625 in) SAWH or COWH Once per test unit or not more than 100lengths of pipe with the same coldexpansion ratio a, c, d
Bend testing of the longitudinal seam weld of welded pipe with D ≥48.3 mm (1.900 in), in Grade L175, L175P, A25 or A25P CW, LFW, HFW or LW Once per test unit of not more than 25tonnes (28 tons) of pipe
Bend testing of the longitudinal seam weld of welded pipe with 48,3mm (1.900 in) < D ≤ 60.3 mm (2.375 in), in Grade L175, L175P, A25 or A25P CW, LFW, HFW or LW Once per test unit of not more than50 tonnes (55 tons) of pipe
Guided-bend testing of the longitudinal or helical-seam weldof welded pipe SAWL, SAWH, COWL or COWH Once per test unit of not more than 25tonnes (28 tons) of pipe
Bend testing of the longitudinal seam weld of welded pipe with 48,3mm (1.900 in) < D ≤ 60.3 mm (2.375 in), in Grade L175, L175P, A25 or A25P CW, LFW, HFW or LW Once per test unit of not more than50 tonnes (55 tons) of pipe
Guided-bend testing of the longitudinal or helical-seam weld of welded pipe SAWL, SAWH, COWL or COWH Once per test unit of not more than 50lengths of pipe of the same grade
Guided-bend testing of the strip/plate end weld of welded pipe SAWH or COWH Once per test unit of not more than 50 lengths of pipe of the same graded
Guided-bend testing of the longitudinal seam weld of welded pipe withD ≥ 323.9 mm (12.750 in) LW Once per test unit of not more than 50lengths of pipe of the same grade
Flattening test of welded pipe CW, LFW, HFW or LW As shown in Figure 6
Hardness testing of hard spots in cold-formed welded pipe LFW, HFW, LW, SAWL, SAWH,COWL or COWH Any hard spot exceeding 50 mm (2.0 in)in any direction
Hydrostatic testing SMLS, CW, LFW, LW, SAWL,SAWH, COWL or COWH Each pipe
Macrographic testing of the longitudinal or helical-seam weld of welded pipe SAWL, SAWH, COWL or COWH At least once per operating shift plus whenever any change of pipe size occurs during the operating shift; or, if 10.2.5.3 applies, at the beginning of the production of each combination of specified outside diameter and specified wall thickness
Metallographic testing of the longitudinal seam weld of welded pipe LFW or HFW At least once per operating shift plus whenever changes of grade, specified outside diameter or specified wall thickness are made; plus whenever significant excursions from operating heat treatment conditions are encountered
Visual inspection SMLS, CW, LFW, HFW, LW, SAWL, SAWH, COWL or COWH Each pipe, except as allowed by 10.2.7.2
Pipe diameter and out-of-roundness SMLS, CW, LFW, HFW, LW, SAWL, SAWH, COWL or COWH At least once per 4 h per operating shift plus whenever any change of pipe size occurs during the operating shift
Wall thickness measurement All pipes Each pipe (see 10.2.8.5)
Weighing of pipe with D < 141.3 mm (5.563 in) SMLS, CW, LFW, HFW, LW, SAWL, SAWH, COWL, or COWH Each pipe or each convenient group of pipes, with the choice being at the discretion of the manufacturer
Weighing of pipe with D ≥ 141.3 mm (5.563 in) SMLS, CW, LFW, HFW, LW, SAWL, SAWH, COWL or COWH Each pipe

Non-destructive inspection

 

SMLS, CW, LFW, HFW, LW, SAWL, SAWH, COWL or COWH In accordance with Annex E

Note:-

Other Specification
Available

API 5L – A,B, X – 42, 46, 52, 56,
60, 65, 70, 80

Special Tube

Saw Pipes & Steam Pipes
Precision Tubes
Fabricated Pipe (with radiography)

In Form of

Round
Hydraulic Tube & 
Horn Tube.

In Length of

Standard 
Double & 
In Cut length also.

Value Added Service

Draw & Expansion as per required Size & Length
Heat Treatment
Bending
Galvanizing
Annealed 
Sand Blasting
Machining Etc.

Test Certificate

Manufacturer Test Certificate 
IBR Test Certificate (Form III-D) 
Laboratory Test Certificate from Govt. Approved Lab. 
Under Third Party Inspection with Excise Gate Pass to avail
Modvat benefit.

 

Tests & Certificates

• Visual and Dimensional Inspection:

  • The pipe shall be delivered to the dimensions specified in the purchase order, subject to the applicable tolerances.
  • The pipe shall be delivered in random lengths or approximate length, as specified in the purchase order.

• Mechanical Tests: 

  • Bend test
  • Guided - bend test
  • Tensile
  • Flattening
  • Expanding
  • Bending
  • Weld Ductility
  • Fracture Toughness
  • PP, PE Testing 
  • Impact Test
  • HIC Test
  • SSC Test
  • Hydro Test
  • Hardness
  • Rediography

• Pipe weld and HAZ tests:

  • The minimum average absorbed energy for each pipe weld and HAZ test, based upon full-size test pieces and a test temperature of 0˚ C (32 ˚F).
  • 27 J for pipe with D < 1 422 mm (56.000 in) in grade <= L555 or X80.
  • 40 J for pipe with D >= 1 422 mm (56.000 in).
  • 40 J for pipe in grade > L555 or X80. 

• Metallographic Examination 

• Chemical Analysis 

• Hydrostatic Test 

  • The pipe shall withstand the hydrostatic test without leakage through the weld seam or the pipe body
  • Jointers need not be hydrostatically tested, provided that the portions of pipe used in making the jointers were successfully hydrostatically tested prior to the joining operation.

• Non Destructive Inspection: 
– Eddy Current
– Ultrasonic Test (Weld Check)
– Ultrasonic (full body, optional) 

• Mill Test Certificates 
– Acc. to EN 10204 2.1; 2.2; 3.1; 3.2 
• NDT Standards 
– U/S (EN ISO 10893-11 Level U3),
– E/C (EN ISO 10893-2 Level E2)
– API Annex E, Annex K
– EN ISO 3138 Annex E, Annex K
– CSA Z.2.245.1
• Surface conditions, Imperfection and defects:

  • All pipes shall be free from defects in the finished condition
  • All pipe shall be free from cracks, sweats and leaks

• Laminations:

  • Laminations or inclusions extending into the face or bevel of the pipe and having a visually determined length in the circumferential directions > 6,4 mm (0.250 in) shall be classified as defects. Pipes that contain such defects shall be rejected or cut back until no such lamination or inclusion is present at the pipe ends.

Coating: -

  • 1. Corvel - 10-8158
  • 2. FBE 3M XC 6171
  • 3. Hempadur 45881
  • 4. Hempel-Hempadur 85671
  • 5. Interline 984
  • 6. Interzone 954
  • 7. Primer 3M Sxotchkote 345
  • 8. Scotchkote 134
  • 9. Sigma EPH 7479
  • 10. Sihma Phenguard
  • 11. Sigma Phenguard 935
  • 12. Sigma Phenguard 940
  • 13. Sigma Line 2000
  • 14. Sigma Shield 1200
  • 15. Carboline Plasite 7159
  • 16. Enviroline 405 HT

 

The quality level of all Steel Line Pipe, API 5L X46 PSL1 Pipe is guaranteed by a complete internal Quality plan and certificating under ISO-9001, TUV (according to AD 2000-Merkblatt W0/TRD100), API, PED (accordance with Pressure Equipment Directive 97/23/EC), Burst test (Det Norske Veritas), and certainly Lloyds and Stoomwezen.

We mainly stock the Pipes of following make : Sumitomo Metal - Japan 
Nippon Steel - Japan 
JFE Steel - Japan 
Kawasaki Steel - Japan 
Vallourec & Mannesmann - France 
Vallourec & Mannesmann - Germany 
Vallourec & Mannesmann - Brazil 
Salzgitter Mannesmann - Germany 
Arcelor Mittal Steel - Romania 
Arcelor Mittal Steel - Czech Republic 
Tenaris Dalmine - Spain 
Tenaris Silcotub - Romania 
Tenaris Siderca - Argentina
Tenaris Tamsa - Mexico 
Tenaris NKK - Japan 
Volzhski - Russia 
Nizhnedneprovsky - Ukraine 
USS - USA 
Welspun - India 
Jindal Saw - India
Indian Seamless - India
Maharashtra Seamless – India


Third Party Inspection:

  1. TUV

Image result for tuv logo for TPI

  1. DNV - GL

Image result for DNV Gl logo tpi

  1. VELOSI

Image result for Velosi tpi logo

  1. SGS

http://www.sgs.com/images/SGS_Logo_500px_RGB.jpg

  1.  Lloyds

http://www.runwithlloyd.com/uploads/6/0/3/3/6033364/1668967.jpg?193

  1. BV

http://images.proultry.com/images/company/3680/thumb-tpi-20logo-1-.jpg

  1. EIL

http://www.indiabix.com/_files/images/placement-companies/engg-india-ltd.jpg

  1. Jacob

Image result for Jacob tpi logo

  1. Bax Counsel

http://www.baxcounsel.com/images/2.gif

  1. MECON

http://www.geocities.ws/amitksinha_com/mecon.jpg

  1. PDIL

http://www.pdilin.com/images/logo.jpg

API-5L-X52 PSL-1 Seamless, ERW, HFW, LSAW, DSAW, HSAW/SSAW (Spiral Welded) Line Pipe
API-5L Grade-B, X-42, X-46, X-52, X-56, X-60, X-65, X-70, X-80 PSL1 PSL2 Line Pipe

API 5L Grade B PSL1 Line Pipes - Available ex-stock
API 5L Grade B PSL1 Sour Service Line Pipes - Available ex-stock
API 5L Grade B PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X42 PSL1 Line Pipes - Available ex-stock
API 5L X42 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X42 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X46 PSL1 Line Pipes - Available ex-stock
API 5L X46 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X46 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X52 PSL1 Line Pipes - Available ex-stock
API 5L X52 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X52 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X56 PSL1 Line Pipes - Available ex-stock
API 5L X56 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X56 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X60 PSL1 Line Pipes - Available ex-stock
API 5L X60 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X60 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X65 PSL1 Line Pipes - Available ex-stock
API 5L X65 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X65 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X70 PSL1 Line Pipes - Available ex-stock
API 5L X70 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X70 PSL1 NACE MR-0175 Line Pipes - Available ex-stock
API 5L X80 PSL1 Line Pipes - Available ex-stock
API 5L X80 PSL1 Sour Service Line Pipes - Available ex-stock
API 5L X80 PSL1 NACE MR-0175 Line Pipes - Available ex-stock

 

Size Range: -

    • Seamless Pipe : ½” to 24”
    • ERW Pipe : ½” to 24”
    • LSAW/DSAW Pipe : 16” and Above
    • HSAW Pipe : 18” and Above

     

    NPS
    DESIGNATOR

    SCH 10

    SCH 20

    SCH 30

    SCH STD

    SCH 40

    SCH 60

    SCH XS

    SCH 80

    SCH 100

    SCH 120

    SCH 140

    SCH 160

    SCH XXS

    1/8"
    available size
    available size
    available size
    available size
    available size
    available size
    1/4"
    available size
    available size
    available size
    available size
    available size
    available size
    3/8"
    available size
    available size
    available size
    available size
    available size
    available size
    1/2"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    3/4"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    1"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    1 1/4"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    1 1/2"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    2"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    2 1/2"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    3"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    3 1/2"
    available size
    available size
    available size
    available size
    available size
    available size
    4"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    5"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    6"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    8"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    10"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    12"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    14"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    16"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    18"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    20"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    22"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    24"
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    available size
    26"
    available size
    available size
    available size
    available size
    28"
    available size
    available size
    available size
    available size
    available size
    30"
    available size
    available size
    available size
    available size
    available size
    32"
    available size
    available size
    available size
    available size
    available size
    available size
    34"
    available size
    available size
    available size
    available size
    available size
    available size
    36"
    available size
    available size
    available size
    available size
    available size
    available size
    38"
    available size
    available size
    40"
    available size
    available size
    42"
    available size
    available size
    44"
    available size
    available size
    46"
    available size
    available size
    48"
    available size
    available size

     

     

     

     

     

     

     

     

     

     

     

     

     

    Note: - We can supply heavy thickness of pipe as per clients requirements.

    Other Related Grades: -


    API 5L Grade B
    API 5L Grade X42
    API 5L Grade X46
    API 5L Grade X52
    API 5L Grade X56
    API 5L Grade X60
    API 5L Grade X65
    API 5L Grade X70
    API 5L Grade X80


    API 5L Grade B PSL 1
    API 5L Grade X42 PSL 1
    API 5L Grade X46 PSL 1
    API 5L Grade X52 PSL 1
    API 5L Grade X56 PSL 1
    API 5L Grade X60 PSL 1
    API 5L Grade X65 PSL 1
    API 5L Grade X70 PSL 1
    API 5L Grade X80 PSL 1


    API 5L Grade B PSL 2
    API 5L Grade X42 PSL 2
    API 5L Grade X46 PSL 2
    API 5L Grade X52 PSL 2
    API 5L Grade X56 PSL 2
    API 5L Grade X60 PSL 2
    API 5L Grade X65 PSL 2
    API 5L Grade X70 PSL 2
    API 5L Grade X80 PSL 2

    API 5L Grade B PSL 1 SEAMLESS
    API 5L Grade X42 PSL 1 SEAMLESS
    API 5L Grade X46 PSL 1 SEAMLESS
    API 5L Grade X52 PSL 1 SEAMLESS
    API 5L Grade X56 PSL 1 SEAMLESS
    API 5L Grade X60 PSL 1 SEAMLESS
    API 5L Grade X65 PSL 1 SEAMLESS
    API 5L Grade X70 PSL 1 SEAMLESS
    API 5L Grade X80 PSL 1 SEAMLESS

    API 5L Grade B PSL 2 SEAMLESS
    API 5L Grade X42 PSL 2 SEAMLESS
    API 5L Grade X46 PSL 2 SEAMLESS
    API 5L Grade X52 PSL 2 SEAMLESS
    API 5L Grade X56 PSL 2 SEAMLESS
    API 5L Grade X60 PSL 2 SEAMLESS
    API 5L Grade X65 PSL 2 SEAMLESS
    API 5L Grade X70 PSL 2 SEAMLESS
    API 5L Grade X80 PSL 2 SEAMLESS


    API 5L Grade B PSL 1 SAW
    API 5L Grade X42 PSL 1 SAW
    API 5L Grade X46 PSL 1 SAW
    API 5L Grade X52 PSL 1 SAW
    API 5L Grade X56 PSL 1 SAW
    API 5L Grade X60 PSL 1 SAW
    API 5L Grade X65 PSL 1 SAW
    API 5L Grade X70 PSL 1 SAW
    API 5L Grade X80 PSL 1 SAW


    API 5L Grade B PSL 2 SAW
    API 5L Grade X42 PSL 2 SAW
    API 5L Grade X46 PSL 2 SAW
    API 5L Grade X52 PSL 2 SAW
    API 5L Grade X56 PSL 2 SAW
    API 5L Grade X60 PSL 2 SAW
    API 5L Grade X65 PSL 2 SAW
    API 5L Grade X70 PSL 2 SAW
    API 5L Grade X80 PSL 2 SAW


    API 5L Grade B PSL 1 ERW
    API 5L Grade X42 PSL 1 ERW
    API 5L Grade X46 PSL 1 ERW
    API 5L Grade X52 PSL 1 ERW
    API 5L Grade X56 PSL 1 ERW
    API 5L Grade X60 PSL 1 ERW
    API 5L Grade X65 PSL 1 ERW
    API 5L Grade X70 PSL 1 ERW
    API 5L Grade X80 PSL 1 ERW


    API 5L Grade B PSL 2 ERW
    API 5L Grade X42 PSL 2 ERW
    API 5L Grade X46 PSL 2 ERW
    API 5L Grade X52 PSL 2 ERW
    API 5L Grade X56 PSL 2 ERW
    API 5L Grade X60 PSL 2 ERW
    API 5L Grade X65 PSL 2 ERW
    API 5L Grade X70 PSL 2 ERW
    API 5L Grade X80 PSL 2 ERW

    API 5L Grade B PSL 1 HFW
    API 5L Grade X42 PSL 1 HFW
    API 5L Grade X46 PSL 1 HFW
    API 5L Grade X52 PSL 1 HFW
    API 5L Grade X56 PSL 1 HFW
    API 5L Grade X60 PSL 1 HFW
    API 5L Grade X65 PSL 1 HFW
    API 5L Grade X70 PSL 1 HFW
    API 5L Grade X80 PSL 1 HFW


    API 5L Grade B PSL 2 HFW
    API 5L Grade X42 PSL 2 HFW
    API 5L Grade X46 PSL 2 HFW
    API 5L Grade X52 PSL 2 HFW
    API 5L Grade X56 PSL 2 HFW
    API 5L Grade X60 PSL 2 HFW
    API 5L Grade X65 PSL 2 HFW
    API 5L Grade X70 PSL 2 HFW
    API 5L Grade X80 PSL 2 HFW

    API 5L Grade B PSL 1 WELDED
    API 5L Grade X42 PSL 1 WELDED
    API 5L Grade X46 PSL 1 WELDED
    API 5L Grade X52 PSL 1 WELDED
    API 5L Grade X56 PSL 1 WELDED
    API 5L Grade X60 PSL 1 WELDED
    API 5L Grade X65 PSL 1 WELDED
    API 5L Grade X70 PSL 1 WELDED
    API 5L Grade X80 PSL 1 WELDED


    API 5L Grade B PSL 2 WELDED
    API 5L Grade X42 PSL 2 WELDED
    API 5L Grade X46 PSL 2 WELDED
    API 5L Grade X52 PSL 2 WELDED
    API 5L Grade X56 PSL 2 WELDED
    API 5L Grade X60 PSL 2 WELDED
    API 5L Grade X65 PSL 2 WELDED
    API 5L Grade X70 PSL 2 WELDED
    API 5L Grade X80 PSL 2 WELDED


    API A25 PSL 1 SEAMLESS
    API A25P PSL 1 SEAMLESS
    API A25 PSL 1 WELDED
    API A25P PSL 1 WELDED


    API BR SEAMLESS & WELDED
    API X42R SEAMLESS & WELDED
    API BN SEAMLESS & WELDED
    API X42N SEAMLESS & WELDED
    API X46N SEAMLESS & WELDED
    API X52N SEAMLESS & WELDED
    API X56N SEAMLESS & WELDED
    API X60N SEAMLESS & WELDED


    API BQ SEAMLESS & WELDED
    API X42 Q SEAMLESS & WELDED
    API X46 Q SEAMLESS & WELDED
    API X52 Q SEAMLESS & WELDED
    API X56 Q SEAMLESS & WELDED
    API X60 Q SEAMLESS & WELDED
    API X65 Q SEAMLESS & WELDED
    API X70 Q SEAMLESS & WELDED
    API X80 Q SEAMLESS & WELDED
    API X90 Q SEAMLESS & WELDED
    API X100 Q SEAMLESS & WELDED


    API BM WELDED
    API X42 M WELDED
    API X46 M WELDED
    API X52 M WELDED
    API X56 M WELDED
    API X60 M WELDED
    API X65 M WELDED
    API X70 M WELDED
    API X80 M WELDED
    API X90 M WELDED
    API X100 M WELDED
    API X120 M WELDED


    API BNS SEAMLESS & WELDED
    API X42NS SEAMLESS & WELDED
    API X46NS SEAMLESS & WELDED


    API X52NS SEAMLESS & WELDED
    API BQS SEAMLESS & WELDED
    API X42QS SEAMLESS & WELDED
    API X46QS SEAMLESS & WELDED
    API X52QS SEAMLESS & WELDED
    API X56QS SEAMLESS & WELDED
    API X460QS SEAMLESS & WELDED
    API X65QS SEAMLESS & WELDED
    API X70QS SEAMLESS & WELDED


    API BMS WELDED
    API X42MS WELDED
    API X46MS WELDED
    API X52MS WELDED
    API X56MS WELDED
    API X60MS WELDED
    API X65MS WELDED
    API X70MS WELDED


    API BNO SEAMLESS & WELDED
    API X42NO SEAMLESS & WELDED
    API X46NO SEAMLESS & WELDED
    API X52NO SEAMLESS & WELDED
    API BQO SEAMLESS & WELDED
    API X42 QO SEAMLESS & WELDED
    API X46 QO SEAMLESS & WELDED
    API X52 QO SEAMLESS & WELDED
    API X56 QO SEAMLESS & WELDED
    API X60 QO SEAMLESS & WELDED
    API X65 QO SEAMLESS & WELDED
    API X70 QO SEAMLESS & WELDED
    API X80 QO SEAMLESS & WELDED
    API X90 QO SEAMLESS & WELDED
    API X100 QO SEAMLESS & WELDED


    API BMO WELDED
    API X42 MO WELDED
    API X46 MO WELDED
    API X52 MO WELDED
    API X56 MO WELDED
    API X60 NO WELDED
    API X65 MO WELDED
    API X70 MO WELDED
    API X80 MO WELDED